<?xml version='1.0'?>
<!--
  Copyright (c) 2002, 2016, Oracle and/or its affiliates. All rights reserved.

  The MySQL Connector/J is licensed under the terms of the GPLv2
  <http://www.gnu.org/licenses/old-licenses/gpl-2.0.html>, like most MySQL Connectors.
  There are special exceptions to the terms and conditions of the GPLv2 as it is applied to
  this software, see the FOSS License Exception
  <http://www.mysql.com/about/legal/licensing/foss-exception.html>.

  This program is free software; you can redistribute it and/or modify it under the terms
  of the GNU General Public License as published by the Free Software Foundation; version 2
  of the License.

  This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
  without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
  See the GNU General Public License for more details.

  You should have received a copy of the GNU General Public License along with this
  program; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth
  Floor, Boston, MA 02110-1301  USA

-->
<project name="MySQL Connector/J" default="dist" basedir=".">
    <description>
Compiling Connector/J
=====================

Connector/J 5.1 supports both JDBC 3 and JDBC 4+ with a single code base. This requires JDBC 3 classes to be compiled with Java 5 and JDBC 4+ to be compiled
with Java 8.
The variables 'com.mysql.jdbc.jdk5' and 'com.mysql.jdbc.jdk8' are used to find the respective compilers when building the driver. Side by side
with these, the variable 'com.mysql.jdbc.extra.libs' must point to the location of third-party libraries that we don't distribute and are required for
compiling.
Compiling all JDBC 4+ code with Java 8 alone produces some warnings since JDBC 4.0 and JDBC 4.1 classes don't require a compliler higher than Java 6. To get
more precise results and avoid warnings use the property 'com.mysql.jdbc.jre6.rtjar' to point to the Java 6 'rt.jar' library (usually in 'jre/lib/rt.jar').
Further details can be found in http://dev.mysql.com/doc/connector-j/en/connector-j-installing-source.html.

Targets: "dist", "full-dist", "package", "full-package", "full-package-no-sources", "compile", "install"


Testing Connector/J
===================

Connector/J 5.1 ships with an extensive test suite that can be run simply by providing a MySQL JDBC URL in the variable 'com.mysql.jdbc.testsuite.url' and by
calling the target "test". If nothing more is set, these tests run with the JVMs referred in the variables 'com.mysql.jdbc.jdk5' and 'com.mysql.jdbc.jdk8' for
JDBC 3 and JDBC 4+ related tests respectively. Alternatively, all tests can be run with a single JVM, provided that it is pointed out in the variable
'com.mysql.jdbc.testsuite.jvm'.
Running the full test suite with different JVMs and different MySQL servers at once is also possible. The variables 'com.mysql.jdbc.testsuite.jvm' and
'com.mysql.jdbc.testsuite.url' can be suffixed with an index ".1" to ".9" to indicate the multiple alternatives which results in the matrix of all possible
combinations. The target "test-multijvm" must be called in this case.
Running only one test set is possible by setting the variable 'test' with the class' fully qualified name. If also a comma separated list of test names is
provided in the variable 'methods', then only these will be executed.

Targets: "test", "test-multijvm"


Compliance
==========

This file ships with targets for these matters. Further details can be found in the respective targets.


Coverage and instrumentation
============================

This file ships with target "test-coverage" for collecting coverage results and "report-coverage" for creating the HTML coverage report.
The JCov library needed to run these targets can be found at http://hg.openjdk.java.net/code-tools/jcov, it's JARs should be placed
into ${com.mysql.jdbc.extra.libs}/jcov directory.
The "test-coverage" target instruments classes using JCov, runs tests collecting coverage info into result file set as
${com.mysql.jdbc.coverage.result.dir}/${com.mysql.jdbc.coverage.result.name}.
The "report-coverage" target first merges coverage result files which full paths are passed via 'com.mysql.jdbc.coverage.merge.files'
property into file which path is passed via 'com.mysql.jdbc.coverage.merge.result' property, then builds the HTML report from
'com.mysql.jdbc.coverage.merge.result' file into the directory passed via 'com.mysql.jdbc.coverage.report.dir' property.
If some properties are not passed to ANT script then default values are used:
    com.mysql.jdbc.coverage.result.dir - "${buildDir}/coverage"
    com.mysql.jdbc.coverage.result.name - "result.xml"
    com.mysql.jdbc.coverage.merge.files - none, merge step is skipped
    com.mysql.jdbc.coverage.merge.result - ${com.mysql.jdbc.coverage.result.dir}/result.xml
    com.mysql.jdbc.coverage.report.dir - ${com.mysql.jdbc.coverage.result.dir}/report

Targets: "test-coverage", "report-coverage"


MySQL Fabric support and testing
================================

Support for MySQL Fabric connections is seamlessly included in Connector/J, so when the driver is compiled it already includes all the required classes for it.
Testing MySQL Fabric support can be done by setting specific variables and running the respective targets. Further details can be found in the last targets in
this file.


Sample 'build.properties' that can be used to compile, build, test and test with multi JVMs
===========================================================================================
~~~start cut here~~~
# Basic settings for 'compile', 'test', 'test-multijvm' and targets that depend on these.

# External libraries needed for both compiling and testing:
# - Further details in http://dev.mysql.com/doc/connector-j/en/connector-j-installing-source.html
# - Mandatory.
com.mysql.jdbc.extra.libs=&lt;full_path_to_connector-j-jardeps&gt;

# JDKs needed for compiling:
# - Must point to JDK home directories.
# - Also used for testing if 'com.mysql.jdbc.testsuite.jvm' is not provided.
# - Mandatory.
com.mysql.jdbc.jdk5=&lt;full_path_to_jdk1.5&gt;
com.mysql.jdbc.jdk8=&lt;full_path_to_jdk1.8&gt;

# Java 6 runtime libraries for compiling JDBC 4.0 and JDBC 4.1 classes:
# - Must point to the library 'jre/lib/rt.jar'.
# - Optional. If not provided, Java 8 runtime is used in its place.
com.mysql.jdbc.jre6.rtjar=&lt;full_path_to_jre1.6/lib/rt.jar&gt;

# Single JVM/MySQL tests:
# - Must point to JDK or JRE home directories.
# - If not provided, JDBC 3 tests are run with 'com.mysql.jdbc.jdk5'.
# - If not provided or pointing to a Java5 JVM, JDBC 4+(&lt;4.2) tests are run with 'com.mysql.jdbc.jdk8'.
# - If not provided or pointing to a JVM lower than 8, JDBC 4.2 tests are run with 'com.mysql.jdbc.jdk8'.
# - Optional.
com.mysql.jdbc.testsuite.jvm=&lt;full_path_to_a_jdk_or_jre&gt;
# - URL to the test database.
# - Any of the current MySQL versions.
# - Mandatory for 'test' target.
com.mysql.jdbc.testsuite.url=jdbc:mysql://&lt;host&gt;:&lt;port&gt;/&lt;testDB&gt;?user=&lt;user&gt;&amp;password=&lt;pwd&gt;

# Multiple JVM/MySQL tests:
# - Must point to JDK or JRE home directories.
# - If pointing to a Java5 JVM, JDBC 4+(&lt;4.2) tests are run with 'com.mysql.jdbc.jdk8' instead.
# - If pointing to a JVM lower than 8, JDBC 4.2 tests are run with 'com.mysql.jdbc.jdk8'.
# - Mandatory (at least one, at most eight) for 'test-multijdk' target.
com.mysql.jdbc.testsuite.jvm.1=&lt;full_path_to_a_jdk_or_jre&gt;
com.mysql.jdbc.testsuite.jvm.2=&lt;full_path_to_a_jdk_or_jre&gt;
com.mysql.jdbc.testsuite.jvm.3=&lt;full_path_to_a_jdk_or_jre&gt;
# - URL to the test database(s).
# - Any of the current MySQL versions.
# - Mandatory (at least one, at most eight) for 'test-multijdk' target.
com.mysql.jdbc.testsuite.url.1=jdbc:mysql://&lt;host1&gt;:&lt;port1&gt;/&lt;testDB1&gt;?user=&lt;user1&gt;&amp;password=&lt;pwd1&gt;
com.mysql.jdbc.testsuite.url.2=jdbc:mysql://&lt;host2&gt;:&lt;port2&gt;/&lt;testDB2&gt;?user=&lt;user2&gt;&amp;password=&lt;pwd2&gt;

# Cancels re-compiling between successive test executions.
# - Implicit in multiple JVM/MySQL in between iterations.
# - Comment variable if not needed.
# - Optional.
com.mysql.jdbc.noCleanBetweenCompiles=yes

# Other targets may require specific settings. Check 'build.xml' for details.
~~~end cut here~~~
    </description>


    <!-- ******************** -->
    <!-- ***** SETTINGS ***** -->
    <!-- ******************** -->


    <!-- If build.properties exists, import it. -->
    <property file="build.properties" />

    <property name="major_version" value="5" />
    <property name="minor_version" value="1" />
    <property name="subminor_version" value="40" />
    <property name="version_status" value="" />

    <property name="version" value="${major_version}.${minor_version}.${subminor_version}${version_status}" />
    <property name="prodName" value="mysql-connector-java" />
    <property name="prodDisplayName" value="MySQL Connector Java" />
    <property name="snapshot.version" value="-SNAPSHOT" />
    <property name="extra.version" value="" />
    <property name="full.version" value="${version}${extra.version}${snapshot.version}" />
    <property name="extra.product.name" value="" />
    <property name="fullProdName" value="${prodName}${extra.product.name}-${full.version}" />
    <property name="sourceDir" value="./src" />
    <property name="buildDir" value="./build" />
    <property name="distDir" value="./dist" />
    <property name="junit.results" value="${buildDir}/junit" />
    <property name="debug.enable" value="on" />
    <property name="toPackage" value="${distDir}/toArchive" />
    <property name="packageDest" value="${toPackage}/${fullProdName}" />

    <!-- Send class files to correct location if running in eclipse. -->
    <condition property="compiler.output" value="bin" else="${buildDir}/${fullProdName}">
        <or>
            <isset property="eclipse.running" />
            <isset property="eclipse.pdebuild.home" />
            <contains string="${ant.home}" substring="plugins" />
        </or>
    </condition>

    <!-- The following properties are needed for finding JDK5 and JDK8 needed for compile and can be passed on the command line to ant via -D switches. -->
    <property name="com.mysql.jdbc.jdk5" value="/usr/lib/jvm/jdk1.5" />
    <property name="com.mysql.jdbc.jdk8" value="/usr/lib/jvm/jdk1.8" />

    <!-- The following property allows to point the location of third-party libraries we don't distribute. Default value points to src/lib so user could either
       put these jars there or pass different location via ant -D switch. -->
    <property name="com.mysql.jdbc.extra.libs" value="${sourceDir}/lib" />

    <!-- The following property is needed for finding a JVM to execute the tests and can be passed on the command line to ant via -D switch. -->
    <property name="com.mysql.jdbc.testsuite.jvm" value="${com.mysql.jdbc.jdk5}" />

    <!-- The following property is needed for building the docs and must be passed on the command line to ant via -D switch. -->
    <property name="com.mysql.jdbc.docs.sourceDir" value="/tmp/connectorj/docs/prebuilt" />

    <!-- The following propertyset is used to forward tests setup configurations as system variables to JUnit tasks. -->
    <propertyset id="junit.system.properties">
        <propertyref prefix="com.mysql.jdbc.test." />
        <!-- Exclude 'testsuite' properties ending with '.url', '.url.N', '.jvm' or '.jvm.N'. -->
        <propertyref regex="^com\.mysql\.jdbc\.testsuite\..*(?&lt;!(?:url|jvm)(?:\.\d)?)$" />
    </propertyset>

    <!-- Java compiler arguments to widen warnings detection and fail on warnings. -->
    <condition property="javac.compilerarg" value="-Xlint:all -Werror" else="">
        <isset property="com.mysql.jdbc.failOnWarnings"/>
    </condition>

    <!-- Classpaths settings. -->
    <path id="built.driver.only.classpath">
        <pathelement location="${buildDir}/${fullProdName}" />
    </path>

    <path id="project.build.classpath">
        <fileset dir="${com.mysql.jdbc.extra.libs}">
            <include name="**/*.jar" />
        </fileset>

        <fileset dir="${buildDir}/${fullProdName}/lib">
            <include name="**/*.jar" />
        </fileset>

        <pathelement location="${buildDir}/${fullProdName}" />
    </path>


    <!-- ************************* -->
    <!-- ***** VERIFICATIONS ***** -->
    <!-- ************************* -->


    <!-- Check for required external libraries. -->
    <target name="-extra-libs-check">
        <fail message="The property 'com.mysql.jdbc.extra.libs' must point to a directory that contains the libraries required for build tasks.">
            <condition>
                <not>
                    <available file="${com.mysql.jdbc.extra.libs}" type="dir" />
                </not>
            </condition>
        </fail>
        <fail message="Hibernate libraries, required for build tasks, must be in the directory '${com.mysql.jdbc.extra.libs}/hibernate4'.">
            <condition>
                <not>
                    <available file="${com.mysql.jdbc.extra.libs}/hibernate4" type="dir" />
                </not>
            </condition>
        </fail>
    </target>


    <!-- Check for required JDKs for compilation. -->
    <target name="-compiler-check" depends="-jdk5-check, -jdk8-check, -jre6-rtjar-check" />


    <!-- Check for required JDK5 for compilation of JDBC 3 implementation. -->
    <target name="-jdk5-check">
        <property name="com.mysql.jdbc.jdk5.java" value="${com.mysql.jdbc.jdk5}/bin/java" />
        <property name="com.mysql.jdbc.jdk5.javac" value="${com.mysql.jdbc.jdk5}/bin/javac" />

        <local name="com.mysql.jdbc.jdk5.version" />
        <exec executable="${com.mysql.jdbc.jdk5.java}"
              outputproperty="com.mysql.jdbc.jdk5.version"
              failonerror="false"
              failifexecutionfails="false"
              resultproperty="jdk5checkexitstatus">
            <arg value="-version" />
        </exec>

        <fail message="Java 5 is required. Set the full path to this JDK home with the property 'com.mysql.jdbc.jdk5'. Default: '/usr/lib/jvm/jdk1.5').
Java 8 (for JDBC 4+ implementation) is also required. Set the full path to this JDK home with the property 'com.mysql.jdbc.jdk8'. Default: '/usr/lib/jvm/jdk1.8'.">
            <condition>
                <not>
                    <and>
                        <equals arg1="${jdk5checkexitstatus}" arg2="0" />
                        <contains string="${com.mysql.jdbc.jdk5.version}" substring="java version &quot;1.5" casesensitive="true" />
                    </and>
                </not>
            </condition>
        </fail>
    </target>


    <!-- Check for required JDK8 for compilation of JDBC 4+ implementation. -->
    <target name="-jdk8-check">
        <property name="com.mysql.jdbc.jdk8.java" value="${com.mysql.jdbc.jdk8}/bin/java" />
        <property name="com.mysql.jdbc.jdk8.javac" value="${com.mysql.jdbc.jdk8}/bin/javac" />

        <local name="com.mysql.jdbc.jdk8.version" />
        <exec executable="${com.mysql.jdbc.jdk8.java}"
              outputproperty="com.mysql.jdbc.jdk8.version"
              failonerror="false"
              failifexecutionfails="false"
              resultproperty="jdk8checkexitstatus">
            <arg value="-version" />
        </exec>

        <fail message="Java 8 (for JDBC 4+ implementation) is required. Set the full path to this JDK home with the property 'com.mysql.jdbc.jdk8'. Default: '/usr/lib/jvm/jdk1.8'.">
            <condition>
                <not>
                    <and>
                        <equals arg1="${jdk8checkexitstatus}" arg2="0" />
                        <contains string="${com.mysql.jdbc.jdk8.version}" substring="java version &quot;1.8" casesensitive="true" />
                    </and>
                </not>
            </condition>
        </fail>
    </target>


    <!-- Check for Java 6 runtime libraries for compilation of JDBC 4.0 and JDBC 4.1 implementations. Ignored if property is undefined. -->
    <target name="-jre6-rtjar-check">
        <fail message="Invalid or missing Java 6 runtime library pointed by 'com.mysql.jdbc.jre6.rtjar'. ">
            <condition>
                <and>
                    <isset property="com.mysql.jdbc.jre6.rtjar" />
                    <not>
                        <available file="${com.mysql.jdbc.jre6.rtjar}" />
                    </not>
                </and>
            </condition>
        </fail>
    </target>


    <!-- Check provided URL for running unit tests. -->
    <target name="-testsuite-url-check">
        <condition property="com.mysql.jdbc.testsuite.url.final" value="${com.mysql.jdbc.testsuite.url.internal}" else="${com.mysql.jdbc.testsuite.url}">
            <isset property="com.mysql.jdbc.testsuite.url.internal" />
        </condition>

        <fail message="Set the MySQL database connection string for the test suite in one of the properties, 'com.mysql.jdbc.testsuite.url' or 'com.mysql.jdbc.testsuite.url.N', according to desired target.">
            <condition>
                <not>
                    <or>
                        <isset property="com.mysql.jdbc.testsuite.url.internal" />
                        <isset property="com.mysql.jdbc.testsuite.url" />
                    </or>
                </not>
            </condition>
        </fail>
    </target>


    <!-- Check provided URL for running compliance tests. -->
    <target name="-compliance-url-check">
        <condition property="com.mysql.jdbc.compliance.url.final" value="${com.mysql.jdbc.compliance.url.internal}" else="${com.mysql.jdbc.compliance.url}">
            <isset property="com.mysql.jdbc.compliance.url.internal" />
        </condition>

        <fail message="Set the MySQL database connection string for the compliance tests in one of the properties, 'com.mysql.jdbc.compliance.url' or 'com.mysql.jdbc.compliance.url.N', according to desired target.">
            <condition>
                <not>
                    <or>
                        <isset property="com.mysql.jdbc.compliance.url.internal" />
                        <isset property="com.mysql.jdbc.compliance.url" />
                    </or>
                </not>
            </condition>
        </fail>
    </target>


    <!-- Check provided JVM for running tests. -->
    <target name="-testsuite-jvm-check" depends="-jdk8-check">
        <condition property="com.mysql.jdbc3.testsuite.jvm.java"
                   value="${com.mysql.jdbc.testsuite.jvm.internal}/bin/java"
                   else="${com.mysql.jdbc.testsuite.jvm}/bin/java">
            <isset property="com.mysql.jdbc.testsuite.jvm.internal" />
        </condition>

        <local name="com.mysql.jdbc.testsuite.jvm.version" />
        <exec executable="${com.mysql.jdbc3.testsuite.jvm.java}"
              outputproperty="com.mysql.jdbc.testsuite.jvm.version"
              failonerror="false"
              failifexecutionfails="false"
              resultproperty="jvmcheckexitstatus">
            <arg value="-version" />
        </exec>

        <fail message="Testing Connector/J requires a JVM 1.5 or higher. Set the path to this JVM (JRE or JDK) home with the property 'com.mysql.jdbc.testsuite.jvm'. Default: '${com.mysql.jdbc.jdk5}'.">
            <condition>
                <not>
                    <equals arg1="${jvmcheckexitstatus}" arg2="0" />
                </not>
            </condition>
        </fail>

        <!-- Run JDBC 4+(<4.2) tests with ${com.mysql.jdbc.jdk8.java} if chosen JVM for tests is JVM5 -->
        <condition property="com.mysql.jdbc4.testsuite.jvm.java" value="${com.mysql.jdbc.jdk8.java}" else="${com.mysql.jdbc3.testsuite.jvm.java}">
            <contains string="${com.mysql.jdbc.testsuite.jvm.version}" substring="java version &quot;1.5" casesensitive="true" />
        </condition>

        <!-- Run JDBC 4.2 tests with ${com.mysql.jdbc.jdk8.java} if chosen JVM for tests is JVM5 or JVM6 or JVM7 -->
        <condition property="com.mysql.jdbc42.testsuite.jvm.java" value="${com.mysql.jdbc.jdk8.java}" else="${com.mysql.jdbc3.testsuite.jvm.java}">
            <or>
                <contains string="${com.mysql.jdbc.testsuite.jvm.version}" substring="java version &quot;1.5" casesensitive="true" />
                <contains string="${com.mysql.jdbc.testsuite.jvm.version}" substring="java version &quot;1.6" casesensitive="true" />
                <contains string="${com.mysql.jdbc.testsuite.jvm.version}" substring="java version &quot;1.7" casesensitive="true" />
            </or>
        </condition>
    </target>


    <!-- ************************************** -->
    <!-- ***** INITIALIZATION & FILE COPY ***** -->
    <!-- ************************************** -->


    <!-- Prepares files and settings for compiling driver. -->
    <target name="init" depends="-compiler-check, -init-copy, -init-filter-license, -init-no-crypto">
        <!-- The following is needed for source distributions as the classpath can't be dynamically altered, and not having this directory present causes the
             build to fail. -->
        <available file="${com.mysql.jdbc.docs.sourceDir}" property="com.mysql.jdbc.docs.sourcesPresent" />
        <available classname="com.mchange.v2.c3p0.QueryConnectionTester" classpathref="project.build.classpath" property="com.mysql.jdbc.c3p0Present" />
        <available classname="org.apache.log4j.Logger" classpathref="project.build.classpath" property="com.mysql.jdbc.log4jPresent" />
        <available classname="org.jboss.resource.adapter.jdbc.ValidConnectionChecker"
                   classpathref="project.build.classpath"
                   property="com.mysql.jdbc.jbossPresent" />
    </target>


    <!-- Copy source files and fix licensing header in source files. -->
    <target name="-init-copy" depends="-init-copy-common, -replace-headers-commercial" />


    <!-- Copy source files. -->
    <target name="-init-copy-common" depends="clean">
        <tstamp />

        <mkdir dir="${buildDir}" />

        <exec dir="."
              executable="cmd"
              osfamily="windows"
              outputproperty="git_revision_from_cmd"
              failonerror="false"
              failifexecutionfails="false"
              resultproperty="gitcheckexitstatus">
            <arg line="/c git rev-parse --verify HEAD^^{commit}" />
        </exec>

        <exec executable="git"
              osfamily="unix"
              outputproperty="git_revision_from_cmd"
              failonerror="false"
              failifexecutionfails="false"
              resultproperty="gitcheckexitstatus">
            <arg line="rev-parse --verify HEAD^{commit}" />
        </exec>

        <!-- The following workaround is needed for the RE builds environment, which build from a non-versioned directory, so revision information is provided
            from an external revision-info.properties file. -->
        <property prefix="revinfo" file="revision-info.properties" />

        <condition property="git_revision" value="${git_revision_from_cmd}" else="${revinfo.commit}">
            <equals arg1="${gitcheckexitstatus}" arg2="0" />
        </condition>

        <filterset id="versionFilterset">
            <filter token="MYSQL_CJ_MAJOR_VERSION" value="${major_version}" />
            <filter token="MYSQL_CJ_MINOR_VERSION" value="${minor_version}" />
            <filter token="MYSQL_CJ_SUBMINOR_VERSION" value="${subminor_version}" />
            <filter token="MYSQL_CJ_VERSION_STATUS" value="${version_status}" />
            <filter token="MYSQL_CJ_VERSION" value="${full.version}" />
            <filter token="MYSQL_CJ_REVISION" value="${git_revision}" />
            <filter token="MYSQL_CJ_FULL_PROD_NAME" value="${fullProdName}" />
            <filter token="MYSQL_CJ_DISPLAY_PROD_NAME" value="${prodDisplayName}" />
        </filterset>

        <condition property="licensetype" value="commercial" else="GPL">
            <isset property="com.mysql.jdbc.commercialBuild" />
        </condition>
        <filterset id="licenseFilterset">
            <filter token="MYSQL_CJ_LICENSE_TYPE" value="${licensetype}" />
        </filterset>

        <copy todir="${buildDir}/${fullProdName}" filtering="true">
            <fileset dir="${sourceDir}/" excludes="**/CVS">
                <patternset id="classjar">
                    <exclude name="**/*.class*" />
                    <exclude name="**/*.jar" />
                </patternset>
            </fileset>

            <filterset refid="versionFilterset" />
            <filterset refid="licenseFilterset" />
        </copy>

        <copy todir="${buildDir}/${fullProdName}" filtering="false">
            <fileset dir="${sourceDir}" excludes="**/CVS">
                <patternset id="dojar">
                    <include name="**/*.jar*" />
                </patternset>
            </fileset>
        </copy>
    </target>


    <!-- Fix licensing header in source files. -->
    <target name="-replace-headers-commercial" if="com.mysql.jdbc.commercialBuild">
        <replaceregexp match=" *The MySQL Connector.*1301  ?USA"
                       replace="${line.separator}${line.separator}${line.separator}${line.separator}${line.separator}${line.separator}${line.separator}${line.separator}${line.separator}${line.separator}${line.separator}${line.separator}${line.separator}${line.separator}${line.separator}${line.separator}"
                       flags="s">
            <fileset dir="${buildDir}/${fullProdName}" includes="**/*" />
        </replaceregexp>
    </target>


    <!-- Add commercial license configuration class (Build). -->
    <target name="-init-filter-license" depends="-extra-libs-check, -init-copy" if="com.mysql.jdbc.filterLicense">
        <copy file="${com.mysql.jdbc.extra.libs}/CommercialLicenseConfiguration.notjava"
              toFile="${buildDir}/${fullProdName}/com/mysql/jdbc/LicenseConfiguration.java"
              overwrite="true" />
    </target>


    <!-- Add no-crypto export control class (Build). -->
    <target name="-init-no-crypto" depends="-extra-libs-check, -init-copy" if="com.mysql.jdbc.noCryptoBuild">
        <copy file="${com.mysql.jdbc.extra.libs}/ExportControlledNoCrypto.notjava"
              toFile="${buildDir}/${fullProdName}/com/mysql/jdbc/ExportControlled.java"
              overwrite="true" />
    </target>


    <!-- Copy commercial license configuration class (Package). -->
    <target name="-copy-filter-license" depends="-extra-libs-check, -init-copy" if="com.mysql.jdbc.filterLicense">
        <copy file="${com.mysql.jdbc.extra.libs}/CommercialLicenseConfiguration.notjava"
              toFile="${packageDest}/src/com/mysql/jdbc/LicenseConfiguration.java"
              overwrite="true" />
    </target>


    <!-- Copy no-crypto export control class (Package). -->
    <target name="-copy-no-crypto" depends="-extra-libs-check, -init-copy" if="com.mysql.jdbc.noCryptoBuild">
        <copy file="${com.mysql.jdbc.extra.libs}/ExportControlledNoCrypto.notjava"
              toFile="${packageDest}/src/com/mysql/jdbc/ExportControlled.java"
              overwrite="true" />
    </target>


    <!-- Copy README-commercial info (Package). -->
    <target name="-copy-readme-commercial" depends="-extra-libs-check, -init-copy" if="com.mysql.jdbc.commercialBuild">
        <copy file="${com.mysql.jdbc.extra.libs}/README-commercial" tofile="${packageDest}/README.txt" filtering="true">
            <filterset refid="versionFilterset" />
            <filterset refid="licenseFilterset" />
        </copy>
        <copy file="${packageDest}/README.txt" tofile="${packageDest}/README" overwrite="true" />
    </target>


    <!-- Copy README info (Package). -->
    <target name="-copy-readme-noncommercial" depends="-init-copy" unless="com.mysql.jdbc.commercialBuild">
        <copy file="${basedir}/README" tofile="${packageDest}/README.txt" filtering="true">
            <filterset refid="versionFilterset" />
        </copy>
        <copy file="${packageDest}/README.txt" tofile="${packageDest}/README" overwrite="true" />
    </target>


    <!-- Copy LICENCE.mysql and replace license commercial headers (Package). -->
    <target name="-replace-license-commercial" depends="-extra-libs-check, -init-copy" if="com.mysql.jdbc.commercialBuild">
        <delete file="${packageDest}/COPYING" />
        <copy file="${com.mysql.jdbc.extra.libs}/LICENSE.mysql" toDir="${packageDest}" />

        <!-- For safety. -->
        <replaceregexp match=" *The MySQL Connector.*1301  ?USA"
                       replace="${line.separator}${line.separator}${line.separator}${line.separator}${line.separator}${line.separator}${line.separator}${line.separator}${line.separator}${line.separator}${line.separator}${line.separator}${line.separator}${line.separator}${line.separator}${line.separator}"
                       flags="s">
            <fileset dir="${packageDest}" includes="**/*" />
        </replaceregexp>
    </target>


    <!-- ************************************ -->
    <!-- ***** DISTRIBUTION & PACKAGING ***** -->
    <!-- ************************************ -->


    <!-- Make MySQL GPL-licensed or commercially-licensed binaries package, that contain sources and docs. -->
    <target name="full-package"
            description="Builds driver, binary .jar file, docs and packages (.zip, .tar.gz) suitable for distribution that _do_ contain sources and docs."
            depends="full-dist, -make-packages, -create-archives" />


    <!-- Make MySQL GPL-licensed or commercially-licensed binaries package, that doesn't contain sources but contain docs. -->
    <target name="full-package-no-sources"
            description="Builds driver, binary .jar file, docs and packages (.zip, .tar.gz) suitable for distribution that do _not_ contain sources but contain docs."
            depends="full-dist, -make-packages, -remove-sources, -create-archives" />


    <!-- Make MySQL GPL-licensed or commercially-licensed binaries package, that contain sources but no docs. -->
    <target name="package"
            description="Builds driver, binary .jar file, docs and packages (.zip, .tar.gz) suitable for distribution that _do_ contain sources but no docs."
            depends="dist, -make-packages, -create-archives" />


    <!-- Build a distribution 'image' that include docs. -->
    <target name="full-dist" description="Builds driver, binary .jar file and docs, basically a distribution 'image'." depends="dist, -bundle-docs" />


    <!-- Build and install the driver jar into the local maven repository. -->
    <target name="install" description="Builds and installs the driver jar into the local maven repository." depends="full-package">
        <exec executable="mvn" osfamily="unix" failonerror="true" failifexecutionfails="true">
            <arg line="install:install-file 
                -Dfile=${mavenUploadDir}/${fullProdName}.jar
                -Dsources=${mavenUploadDir}/${fullProdName}-sources.jar
                -DpomFile=${buildDir}/${fullProdName}/doc/sources/pom.xml
                -DcreateChecksum=true" />
        </exec>
    </target>


    <!-- Build a distribution 'image' that doesn't include docs. -->
    <target name="dist" description="Builds driver and binary .jar file, basically a distribution 'image' without docs." depends="init, compile">
        <delete file="${buildDir}/${fullProdName}-bin.jar" />

        <mkdir dir="${buildDir}/META-INF" />

        <!-- JDBC 4+ support of service provider mechanism. -->
        <mkdir dir="${buildDir}/${fullProdName}/META-INF/services/" />
        <echo file="${buildDir}/${fullProdName}/META-INF/services/java.sql.Driver"
              message="com.mysql.jdbc.Driver${line.separator}com.mysql.fabric.jdbc.FabricMySQLDriver" />

        <property name="osgid-version" value="${major_version}.${minor_version}.${subminor_version}" />

        <property name="jee-imports"
                  value="javax.naming,javax.naming.spi,javax.sql,javax.transaction.xa;version=&quot;[1.0.1, 2.0.0)&quot;;resolution:=optional" />
        <property name="crypto-imports" value="javax.net,javax.net.ssl;version=&quot;[1.0.1, 2.0.0)&quot;;resolution:=optional" />
        <property name="jdbc4-imports"
                  value="javax.xml.parsers, javax.xml.stream,javax.xml.transform,javax.xml.transform.dom,javax.xml.transform.sax,javax.xml.transform.stax,javax.xml.transform.stream,org.w3c.dom,org.xml.sax,org.xml.sax.helpers;resolution:=optional" />
        <property name="integration-imports"
                  value="com.mchange.v2.c3p0;version=&quot;[0.9.1.2, 1.0.0)&quot;;resolution:=optional,org.jboss.resource.adapter.jdbc;resolution:=optional,org.jboss.resource.adapter.jdbc.vendor;resolution:=optional" />

        <property name="driver-exports"
                  value="com.mysql.jdbc;version=&quot;${osgid-version}&quot;;uses:=&quot;com.mysql.jdbc.log,javax.naming,javax.net.ssl,javax.xml.transform,org.xml.sax&quot;" />
        <property name="jee-exports"
                  value="com.mysql.jdbc.jdbc2.optional;version=&quot;${osgid-version}&quot;;uses:=&quot;com.mysql.jdbc,com.mysql.jdbc.log,javax.naming,javax.sql,javax.transaction.xa&quot;" />
        <property name="logging-exports" value="com.mysql.jdbc.log;version=&quot;${osgid-version}&quot;" />
        <property name="profiling-exports" value="com.mysql.jdbc.profiler;version=&quot;${osgid-version}&quot;;uses:=&quot;com.mysql.jdbc&quot;" />
        <property name="util-exports" value="com.mysql.jdbc.util;version=&quot;${osgid-version}&quot;;uses:=&quot;com.mysql.jdbc.log&quot;" />
        <property name="exceptions-exports" value="com.mysql.jdbc.exceptions;version=&quot;${osgid-version}&quot;" />
        <property name="jdbc4-exceptions-exports"
                  value="com.mysql.jdbc.exceptions.jdbc4;version=&quot;${osgid-version}&quot;;uses:=&quot;com.mysql.jdbc&quot;" />
        <property name="fabric-exports"
                  value="com.mysql.fabric.jdbc;version=&quot;${osgid-version}&quot;;uses:=&quot;com.mysql.jdbc&quot;" />

        <property name="interceptors-exports" value="com.mysql.jdbc.interceptors;version=&quot;${osgid-version}&quot;;uses:=&quot;com.mysql.jdbc&quot;" />
        <property name="integration-exports"
                  value="com.mysql.jdbc.integration.c3p0;version=&quot;${osgid-version}&quot;,com.mysql.jdbc.integration.jboss;version=&quot;${osgid-version}&quot;" />
        <property name="configs-exports" value="com.mysql.jdbc.configs;version=&quot;${osgid-version}&quot;" />
        <property name="legacy-exports" value="org.gjt.mm.mysql;version=&quot;${osgid-version}&quot;" />

        <manifest file="${buildDir}/${fullProdName}/META-INF/MANIFEST.MF">
            <attribute name="Built-By" value="${user.name}" />
            <attribute name="Specification-Title" value="JDBC" />
            <attribute name="Specification-Version" value="4.2" />
            <attribute name="Specification-Vendor" value="Oracle Corporation" />
            <attribute name="Implementation-Title" value="${prodDisplayName}" />
            <attribute name="Implementation-Version" value="${full.version}" />
            <attribute name="Implementation-Vendor-Id" value="com.mysql" />
            <attribute name="Implementation-Vendor" value="Oracle" />

            <!-- OSGi -->
            <attribute name="Bundle-Vendor" value="Oracle Corporation" />
            <attribute name="Bundle-Classpath" value="." />
            <attribute name="Bundle-Version" value="${osgid-version}" />
            <attribute name="Bundle-Name" value="Oracle Corporation's JDBC Driver for MySQL" />
            <attribute name="Bundle-ManifestVersion" value="2" />
            <attribute name="Bundle-SymbolicName" value="com.mysql.jdbc" />
            <attribute name="Export-Package"
                       value="${driver-exports},${jee-exports},${logging-exports},${profiling-exports},${util-exports},${exceptions-exports},${jdbc4-exceptions-exports},${interceptors-exports},${integration-exports},${configs-exports},${legacy-exports},${fabric-exports}" />
            <attribute name="Import-Package" value="${crypto-imports},${jdbc4-imports},${jee-imports},${integration-imports}" />
        </manifest>

        <jar jarfile="${buildDir}/${fullProdName}/${fullProdName}-bin.jar"
             basedir="${compiler.output}"
             includes="**/*.class,**/*.properties*,META-INF/**"
             excludes="testsuite/**,demo/**"
             index="true"
             manifest="${buildDir}/${fullProdName}/META-INF/MANIFEST.MF" />
    </target>


    <!-- Prepare a package for archiving. -->
    <target name="-make-packages"
            depends="-make-packages-init, -copy-filter-license, -copy-no-crypto, -copy-readme-commercial, -copy-readme-noncommercial, -replace-license-commercial">
        <!-- Fix CRLF for various platforms. -->

        <!-- For Windows-y platforms. -->
        <fixcrlf srcdir="${packageDest}" tab="remove" tablength="8" eol="crlf" includes="**/README.txt" />

        <!-- For Unix-y platforms. -->
        <fixcrlf srcdir="${packageDest}" tab="remove" tablength="8" eol="lf" includes="**/README" />
    </target>


    <!-- Prepare a package for archiving (initialize). -->
    <target name="-make-packages-init" depends="dist">
        <mkdir dir="${distDir}" />
        <mkdir dir="${toPackage}" />
        <mkdir dir="${packageDest}" />

        <delete dir="${toPackage}" />

        <patternset id="non.test.sources">
            <exclude name="**/*.nb*" />
            <exclude name="**/*.bak" />
            <exclude name="**/*.*~" />
            <exclude name="**/clover/*" />
            <exclude name="**/checkstyle/*" />
            <exclude name="**/.*" />
        </patternset>

        <copy todir="${packageDest}">
            <fileset dir="${buildDir}/${fullProdName}" includes="debug/*, docs/**, *.jar" excludes="docs/sources">
                <patternset refid="non.test.sources" />
            </fileset>

            <fileset dir="." includes="src/com/**, src/doc/**, src/lib/*, src/org/**, src/testsuite/**, src/demo/**, build.xml, CHANGES, COPYING">
                <patternset refid="non.test.sources" />
            </fileset>
        </copy>
    </target>


    <!-- Delete source files from package. -->
    <target name="-remove-sources">
        <echo>Removing sources from '${toPackage}'</echo>
        <delete>
            <fileset dir="${packageDest}">
                <include name="**/*.java" />
                <include name="build.xml" />
            </fileset>
        </delete>

        <delete dir="${packageDest}/src" />

        <property name="com.mysql.jdbc.noSources" value="yes" />
    </target>


    <!-- Create archive files with package. -->
    <target name="-create-archives" depends="-create-common-archives, -create-maven-archive" />


    <!-- Create common archives. -->
    <target name="-create-common-archives" depends="-make-packages">
        <delete file="${distDir}/${fullProdName}.tar.gz" />

        <tar destfile="${distDir}/${fullProdName}.tar.gz" compression="gzip" longfile="gnu">
            <tarfileset dir="${toPackage}">
                <patternset refid="non.test.sources" />
            </tarfileset>
        </tar>
        <checksum file="${distDir}/${fullProdName}.tar.gz" forceOverwrite="yes" fileext=".md5" algorithm="MD5" />

        <delete file="${distDir}/${fullProdName}.zip" />

        <zip destfile="${distDir}/${fullProdName}.zip">
            <fileset dir="${toPackage}">
                <patternset refid="non.test.sources" />
            </fileset>
        </zip>
        <checksum file="${distDir}/${fullProdName}.zip" forceOverwrite="yes" fileext=".md5" algorithm="MD5" />
    </target>


    <!-- Create a Maven bundle for upload to their repository. -->
    <target name="-create-maven-archive"
            depends="-make-packages, -create-maven-archive-common, -create-maven-archive-sources"
            unless="com.mysql.jdbc.commercialBuild">
        <delete file="${distDir}/${fullProdName}.maven.tar.gz" />

        <tar destfile="${distDir}/${fullProdName}.maven.tar.gz" basedir="${mavenUploadDir}" compression="gzip" longfile="gnu" />
    </target>


    <!-- Create a Maven bundle for upload to their repository (common files to all packaging modes). -->
    <target name="-create-maven-archive-common">
        <tempfile destdir="${buildDir}" prefix="maven-bundle-" property="mavenUploadDir" />

        <mkdir dir="${mavenUploadDir}" />

        <jar jarfile="${mavenUploadDir}/${fullProdName}.jar"
             basedir="${compiler.output}"
             includes="**/*.class,**/*.properties*,COPYING,README,META-INF/**"
             excludes="testsuite/**,demo/**"
             index="true"
             manifest="${buildDir}/${fullProdName}/META-INF/MANIFEST.MF" />
        <checksum file="${mavenUploadDir}/${fullProdName}.jar" forceOverwrite="yes" fileext=".md5" algorithm="MD5" />
        <checksum file="${mavenUploadDir}/${fullProdName}.jar" forceOverwrite="yes" fileext=".sha1" algorithm="SHA-1" />

        <copy file="${buildDir}/${fullProdName}/doc/sources/pom.xml" toFile="${mavenUploadDir}/${fullProdName}.pom" filtering="true" />
        <checksum file="${mavenUploadDir}/${fullProdName}.pom" forceOverwrite="yes" fileext=".md5" algorithm="MD5" />
        <checksum file="${mavenUploadDir}/${fullProdName}.pom" forceOverwrite="yes" fileext=".sha1" algorithm="SHA-1" />

        <copy file="./COPYING" toDir="${mavenUploadDir}" />
        <checksum file="${mavenUploadDir}/COPYING" forceOverwrite="yes" fileext=".md5" algorithm="MD5" />
        <checksum file="${mavenUploadDir}/COPYING" forceOverwrite="yes" fileext=".sha1" algorithm="SHA-1" />
    </target>


    <!-- Create a Maven bundle for upload to their repository (include sources). -->
    <target name="-create-maven-archive-sources" depends="-create-maven-archive-common" unless="com.mysql.jdbc.noSources">
        <jar jarfile="${mavenUploadDir}/${fullProdName}-sources.jar"
             basedir="${compiler.output}"
             includes="**/*.java,**/*.properties*,COPYING,README,README.txt"
             excludes="testsuite/**,demo/**,doc/**" />
        <checksum file="${mavenUploadDir}/${fullProdName}-sources.jar" forceOverwrite="yes" fileext=".md5" algorithm="MD5" />
        <checksum file="${mavenUploadDir}/${fullProdName}-sources.jar" forceOverwrite="yes" fileext=".sha1" algorithm="SHA-1" />
    </target>


    <!-- Prepare docs to include in a distribution. -->
    <target name="-bundle-docs" depends="init" if="com.mysql.jdbc.docs.sourcesPresent">
        <copy file="${com.mysql.jdbc.docs.sourceDir}/en/html/connector-j.html" todir="${buildDir}/${fullProdName}/docs" failonerror="false" />
        <copy file="${com.mysql.jdbc.docs.sourceDir}/en/pdf/connector-j.pdf" todir="${buildDir}/${fullProdName}/docs" failonerror="false" />
        <copy file="${com.mysql.jdbc.docs.sourceDir}/en/txt/connector-j.txt" tofile="${buildDir}/${fullProdName}/docs/README.txt" failonerror="false" />
    </target>


    <!-- ********************* -->
    <!-- ***** COMPILING ***** -->
    <!-- ********************* -->


    <!-- Compile the driver including JDBC 3 and JDBC 4+ implementations, JUnit test suite and 'helpers' for third-party software. -->
    <target name="compile"
            description="Compiles driver including JDBC 3 and JDBC 4+ implementations, JUnit test suite and integration 'helpers' for third-party software."
            depends="init, compile-driver, compile-testsuite, compile-integration" />


    <!-- Compile the driver including JDBC 3 and JDBC 4+ implementations only. -->
    <target name="compile-driver"
            description="Compiles driver including JDBC 3 and JDBC 4+ implementations only."
            depends="-compile-driver-jdbc3, -compile-driver-jdbc4" />


    <!-- Compile JDBC 3 implementation. -->
    <target name="-compile-driver-jdbc3" depends="init, -clean-output">
        <echo>Compiling MySQL Connector/J JDBC 3 implementation with '${com.mysql.jdbc.jdk5}' to '${compiler.output}'</echo>

        <javac sourcepath=""
               srcdir="${buildDir}/${fullProdName}"
               destdir="${compiler.output}"
               deprecation="off"
               debug="${debug.enable}"
               fork="yes"
               executable="${com.mysql.jdbc.jdk5.javac}"
               compiler="modern"
               includeantruntime="false"
               source="1.5"
               target="1.5">
            <include name="**/*.java" />
            <exclude name="testsuite/**" />
            <exclude name="com/mysql/jdbc/integration/**" />
            <exclude name="com/mysql/jdbc/log/Log4JLogger.java" />
            <exclude name="**/JDBC4*.java" />
            <exclude name="**/FabricMultiTenantConnectionProvider.java" />
            <exclude name="**/HibernateFabric.java" />
            <exclude name="com/mysql/jdbc/exceptions/jdbc4/*" />
            <classpath refid="project.build.classpath" />
            <compilerarg line="${javac.compilerarg}" />
        </javac>
    </target>


    <!-- Compile JDBC 4+ implementation. -->
    <target name="-compile-driver-jdbc4" depends="-compile-driver-jdbc3">
        <echo>Compiling MySQL Connector/J JDBC 4+ implementation with '${com.mysql.jdbc.jdk8}' to '${compiler.output}'</echo>

        <javac sourcepath=""
               srcdir="${buildDir}/${fullProdName}"
               destdir="${compiler.output}"
               deprecation="off"
               debug="${debug.enable}"
               fork="yes"
               executable="${com.mysql.jdbc.jdk8.javac}"
               compiler="modern"
               includeantruntime="false"
               bootclasspath="${com.mysql.jdbc.jre6.rtjar}"
               source="1.6"
               target="1.6">
            <include name="**/FabricMultiTenantConnectionProvider.java" />
            <include name="**/HibernateFabric.java" />
            <include name="**/JDBC4*.java" />
            <exclude name="**/JDBC42*.java" />
            <include name="com/mysql/jdbc/exceptions/jdbc4/*" />
            <classpath refid="project.build.classpath" />
            <compilerarg line="${javac.compilerarg}" />
        </javac>

        <javac sourcepath=""
               srcdir="${buildDir}/${fullProdName}"
               destdir="${compiler.output}"
               deprecation="off"
               debug="${debug.enable}"
               fork="yes"
               executable="${com.mysql.jdbc.jdk8.javac}"
               compiler="modern"
               includeantruntime="false"
               source="1.8"
               target="1.8">
            <include name="**/JDBC42*.java" />
            <classpath refid="project.build.classpath" />
            <compilerarg line="${javac.compilerarg}" />
        </javac>
    </target>


    <!-- Compile the driver including JDBC 3 and JDBC 4+ implementations and JUnit test suite. -->
    <target name="compile-testsuite"
            description="Compiles driver including JDBC 3 and JDBC 4+ implementations and JUnit test suite."
            depends="init, compile-driver">
        <echo>Compiling MySQL Connector/J testsuite with '${com.mysql.jdbc.jdk5}' to '${compiler.output}'</echo>

        <javac sourcepath=""
               srcdir="${buildDir}/${fullProdName}"
               destdir="${compiler.output}"
               deprecation="off"
               debug="${debug.enable}"
               fork="yes"
               executable="${com.mysql.jdbc.jdk5.javac}"
               compiler="modern"
               includeantruntime="false"
               source="1.5"
               target="1.5">
            <include name="testsuite/**" />
            <exclude name="testsuite/requiresNonRedists/**" />
            <exclude name="testsuite/**/jdbc4*/**" />
            <classpath refid="project.build.classpath" />
            <compilerarg line="${javac.compilerarg}" />
        </javac>

        <javac sourcepath=""
               srcdir="${buildDir}/${fullProdName}"
               destdir="${compiler.output}"
               deprecation="off"
               debug="${debug.enable}"
               fork="yes"
               executable="${com.mysql.jdbc.jdk8.javac}"
               compiler="modern"
               includeantruntime="false"
               bootclasspath="${com.mysql.jdbc.jre6.rtjar}"
               source="1.6"
               target="1.6">
            <include name="testsuite/**/jdbc4/**" />
            <classpath refid="project.build.classpath" />
            <compilerarg line="${javac.compilerarg}" />
        </javac>

        <javac sourcepath=""
               srcdir="${buildDir}/${fullProdName}"
               destdir="${compiler.output}"
               deprecation="off"
               debug="${debug.enable}"
               fork="yes"
               executable="${com.mysql.jdbc.jdk8.javac}"
               compiler="modern"
               includeantruntime="false"
               source="1.8"
               target="1.8">
            <include name="testsuite/**/jdbc42/**" />
            <classpath refid="project.build.classpath" />
            <compilerarg line="${javac.compilerarg}" />
        </javac>
    </target>


    <!-- Compile the driver including JDBC 3 and JDBC 4+ implementations and integration 'helpers' for third-party software. -->
    <target name="compile-integration"
            description="Compiles driver including JDBC 3 and JDBC 4+ implementations and integration 'helpers' for third-party software."
            depends="compile-driver, -compile-integration-c3p0, -compile-integration-jboss, -compile-integration-log4j" />


    <!-- Compile c3p0 integration. -->
    <target name="-compile-integration-c3p0" depends="compile-driver" if="com.mysql.jdbc.c3p0Present">
        <echo>Compiling MySQL Connector/J-c3p0 integration with '${com.mysql.jdbc.jdk5}' to '${compiler.output}'</echo>

        <javac sourcepath=""
               srcdir="${buildDir}/${fullProdName}"
               destdir="${compiler.output}"
               deprecation="off"
               debug="${debug.enable}"
               fork="yes"
               executable="${com.mysql.jdbc.jdk5.javac}"
               compiler="modern"
               includeantruntime="false"
               source="1.5"
               target="1.5">
            <include name="com/mysql/jdbc/integration/c3p0/**" />
            <classpath refid="project.build.classpath" />
        </javac>
    </target>


    <!-- Compile jBoss integration. -->
    <target name="-compile-integration-jboss" depends="compile-driver" if="com.mysql.jdbc.jbossPresent">
        <echo>Compiling MySQL Connector/J-jboss integration with '${com.mysql.jdbc.jdk5}' to '${compiler.output}'</echo>

        <javac sourcepath=""
               srcdir="${buildDir}/${fullProdName}"
               destdir="${compiler.output}"
               deprecation="off"
               debug="${debug.enable}"
               fork="yes"
               executable="${com.mysql.jdbc.jdk5.javac}"
               compiler="modern"
               includeantruntime="false"
               source="1.5"
               target="1.5">
            <include name="com/mysql/jdbc/integration/jboss/**" />
            <classpath refid="project.build.classpath" />
        </javac>
    </target>


    <!-- Compile Log4j integration. -->
    <target name="-compile-integration-log4j" depends="compile-driver" if="com.mysql.jdbc.log4jPresent">
        <echo>Compiling MySQL Connector/J-log4j integration with '${com.mysql.jdbc.jdk5}' to '${compiler.output}'</echo>

        <javac sourcepath=""
               srcdir="${buildDir}/${fullProdName}"
               destdir="${compiler.output}"
               deprecation="off"
               debug="${debug.enable}"
               fork="yes"
               executable="${com.mysql.jdbc.jdk5.javac}"
               compiler="modern"
               includeantruntime="false"
               source="1.5"
               target="1.5">
            <include name="com/mysql/jdbc/log/Log4JLogger.java" />
            <classpath refid="project.build.classpath" />
        </javac>
    </target>


    <!-- ******************* -->
    <!-- ***** CLEANUP ***** -->
    <!-- ******************* -->


    <!-- Delete the build and distribution directories and archives. -->
    <target name="real-clean" description="Deletes the build and distribution directories.">
        <delete dir="${buildDir}" />
        <delete dir="${distDir}" />
    </target>


    <!-- Delete the build directory. -->
    <target name="clean"
            description="Deletes the build directory unless 'com.mysql.jdbc.noCleanBetweenCompiles=yes'."
            unless="${com.mysql.jdbc.noCleanBetweenCompiles}">
        <delete dir="${buildDir}" />
    </target>


    <!-- Delete compiled classes from build directory. -->
    <target name="-clean-output" unless="${com.mysql.jdbc.noCleanBetweenCompiles}">
        <delete>
            <fileset dir="${buildDir}" includes="**/*.class" />
        </delete>
    </target>


    <!-- ************************* -->
    <!-- ***** DOCUMENTATION ***** -->
    <!-- ************************* -->


    <!-- Generate docs for MySQL Connector/J docs web site. -->
    <target name="docs-generate-dynamic-docs"
            description="Generates docs for the MySQL Connector/J docs web site."
            depends="docs-generate-properties-table, docs-generate-error-mapping-table" />


    <!-- Generate the properties table doc for MySQL Connector/J docs web site. -->
    <target name="docs-generate-properties-table"
            description="Generates properties table doc for the MySQL Connector/J docs web site."
            depends="compile-driver">
        <tempfile property="properties-xml" suffix=".xml" />
        <java classname="com.mysql.jdbc.util.PropertiesDocGenerator" output="${properties-xml}" classpath="${buildDir}/${fullProdName}" />
        <copy file="${properties-xml}" tofile="${buildDir}/${fullProdName}/docs/sources/connPropsToDocbook.xml" />
        <delete file="${properties-xml}" />
    </target>


    <!-- Generate the error mapping table doc for MySQL Connector/J docs web site. -->
    <target name="docs-generate-error-mapping-table"
            description="Generates error mapping table doc for the MySQL Connector/J docs web site."
            depends="compile-driver">
        <tempfile property="errorsMapping-xml" suffix=".xml" />
        <java classname="com.mysql.jdbc.util.ErrorMappingsDocGenerator" output="${errorsMapping-xml}" classpath="${buildDir}/${fullProdName}" />
        <copy file="${errorsMapping-xml}" tofile="${buildDir}/${fullProdName}/docs/sources/errorMapToDocbook.xml" />
        <delete file="${errorsMapping-xml}" />
    </target>


    <!-- ******************* -->
    <!-- ***** TESTING ***** -->
    <!-- ******************* -->


    <!-- Run the full test suite, single test set or single test, and compliance test suite, against multiple JVMs and server configs. -->
    <target name="test-all-multi"
            description="Runs the full test suite, single test set or single test, and compliance test suite, against multiple JVMs and server configs."
            depends="compile">
        <delete dir="${buildDir}/junit" />
        <antcall target="test-multijvm" />
        <antcall target="test-compliance-multijvm" />

        <fail message="Tests failed. Check logs and/or reports in '${buildDir}/junit'." if="tests.compliance.failed" />
    </target>


    <!-- Run the full test suite, single test set or named test against multiple JVMs and server configs. -->
    <target name="test-multijvm"
            description="Runs the full test suite, single test set (variable 'test') or named tests (variables 'test' and 'methods') against multiple JVMs and server configs."
            depends="compile">
        <array8 arrayproperty="com.mysql.jdbc.testsuite.jvm" outputproperty="jvm.value" indexproperty="jvm.index">
            <array8 arrayproperty="com.mysql.jdbc.testsuite.url" outputproperty="url.value" indexproperty="url.index">
                <local name="test.run" />
                <condition property="test.run">
                    <and>
                        <isset property="jvm.value" />
                        <isset property="url.value" />
                    </and>
                </condition>
                <antcall target="-test-multijvm-iteration">
                    <param name="jvm.value" value="${jvm.value}" />
                    <param name="url.value" value="${url.value}" />
                    <param name="url.index" value="${url.index}" />
                    <param name="test.mode" value="testsuite" />
                    <param name="test.target" value="test" />
                    <param name="test.run" value="${test.run}" />
                </antcall>
            </array8>
        </array8>
    </target>


    <!-- Run the full test suite, single test set or named tests against one JVM and one server config. -->
    <target name="test"
            description="Runs the full test suite, single test set (variable 'test') or named tests (variables 'test' and 'methods') against one JVM and one server config."
            depends="-testsuite-url-check, -testsuite-jvm-check, compile, -set-test-result-prefix">
        <property name="junit.unitregress.results" value="${junit.results}/${test.result.prefix}/unitregress" />

        <mkdir dir="${junit.unitregress.results}/report" />

        <local name="test.ismethods" />
        <condition property="test.ismethods">
            <and>
                <isset property="test" />
                <isset property="methods" />
            </and>
        </condition>

        <local name="test.message.jdbc3orcommon" />
        <condition property="test.message.jdbc3orcommon"
                   value="Running JDBC 3 unit tests against '${com.mysql.jdbc.testsuite.url.final}' with jvm '${com.mysql.jdbc3.testsuite.jvm.java}'">
            <not>
                <isset property="test" />
            </not>
        </condition>
        <condition property="test.message.jdbc3orcommon"
                   value="Running JDBC unit test '${test}', method(s) '${methods}' against '${com.mysql.jdbc.testsuite.url.final}' with jvm '${com.mysql.jdbc3.testsuite.jvm.java}'"
                   else="Running JDBC unit test '${test}' against '${com.mysql.jdbc.testsuite.url.final}' with jvm '${com.mysql.jdbc3.testsuite.jvm.java}'">
            <isset property="test.ismethods" />
        </condition>
        <echo>${test.message.jdbc3orcommon}</echo>

        <junit printsummary="yes"
               fork="on"
               forkmode="once"
               jvm="${com.mysql.jdbc3.testsuite.jvm.java}"
               errorProperty="tests.failed"
               failureProperty="tests.failed">
            <jvmarg value="-Xmx1024m" />

            <syspropertyset refid="junit.system.properties" />
            <sysproperty key="com.mysql.jdbc.testsuite.url" value="${com.mysql.jdbc.testsuite.url.final}" />
            <sysproperty key="jcov.template" value="${com.mysql.jdbc.coverage.result.dir.final}/template.xml"/>
            <sysproperty key="jcov.file" value="${com.mysql.jdbc.coverage.result.dir.final}/${com.mysql.jdbc.coverage.result.name.final}"/>

            <classpath>
                <pathelement location="${com.mysql.jdbc.extra.libs}/jcov/jcov_file_saver.jar" />
                <fileset dir="${com.mysql.jdbc.extra.libs}">
                    <include name="**/*.jar" />
                </fileset>
                <fileset dir="${buildDir}/${fullProdName}/lib">
                    <include name="**/*.jar" />
                </fileset>
                <pathelement location="${buildDir}/${fullProdName}-instr" />
                <pathelement location="${buildDir}/${fullProdName}" />
                <pathelement path="${java.class.path}" />
            </classpath>

            <formatter type="xml" />

            <test if="${test.ismethods}" name="${test}" methods="${methods}" todir="${junit.unitregress.results}" />

            <test if="test" unless="methods" name="${test}" todir="${junit.unitregress.results}" />

            <batchtest unless="test" todir="${junit.unitregress.results}">
                <fileset dir="${buildDir}/${fullProdName}">
                    <include name="**/*Test.java" />
                    <exclude name="**/fabric/*.java" />
                    <exclude name="**/perf/*.java" />
                    <exclude name="**/jdbc4*/*Test.java" />
                </fileset>
            </batchtest>
        </junit>

        <local name="test.message.jdbc4" />
        <condition property="test.message.jdbc4"
                   value="Running JDBC 4+(&lt;4.2) unit tests against '${com.mysql.jdbc.testsuite.url.final}' with jvm '${com.mysql.jdbc4.testsuite.jvm.java}'"
                   else="">
            <not>
                <isset property="test" />
            </not>
        </condition>
        <echo>${test.message.jdbc4}</echo>

        <junit printsummary="yes"
               fork="on"
               forkmode="once"
               jvm="${com.mysql.jdbc4.testsuite.jvm.java}"
               errorProperty="tests.failed"
               failureProperty="tests.failed">
            <jvmarg value="-Xmx1024m" />

            <syspropertyset refid="junit.system.properties" />
            <sysproperty key="com.mysql.jdbc.testsuite.url" value="${com.mysql.jdbc.testsuite.url.final}" />
            <sysproperty key="jcov.template" value="${com.mysql.jdbc.coverage.result.dir.final}/template.xml"/>
            <sysproperty key="jcov.file" value="${com.mysql.jdbc.coverage.result.dir.final}/${com.mysql.jdbc.coverage.result.name.final}"/>

            <classpath>
                <pathelement location="${com.mysql.jdbc.extra.libs}/jcov/jcov_file_saver.jar" />
                <fileset dir="${com.mysql.jdbc.extra.libs}">
                    <include name="**/*.jar" />
                </fileset>
                <fileset dir="${buildDir}/${fullProdName}/lib">
                    <include name="**/*.jar" />
                </fileset>
                <pathelement location="${buildDir}/${fullProdName}-instr" />
                <pathelement location="${buildDir}/${fullProdName}" />
                <pathelement path="${java.class.path}" />
            </classpath>

            <formatter type="xml" />

            <batchtest unless="test" todir="${junit.unitregress.results}">
                <fileset dir="${buildDir}/${fullProdName}">
                    <include name="**/jdbc4/*Test.java" />
                </fileset>
            </batchtest>
        </junit>

        <local name="test.message.jdbc42" />
        <condition property="test.message.jdbc42"
                   value="Running JDBC 4.2 unit tests against '${com.mysql.jdbc.testsuite.url.final}' with jvm '${com.mysql.jdbc42.testsuite.jvm.java}'"
                   else="">
            <not>
                <isset property="test" />
            </not>
        </condition>
        <echo>${test.message.jdbc42}</echo>

        <junit printsummary="yes"
               fork="on"
               forkmode="once"
               jvm="${com.mysql.jdbc42.testsuite.jvm.java}"
               errorProperty="tests.failed"
               failureProperty="tests.failed">
            <jvmarg value="-Xmx1024m" />

            <syspropertyset refid="junit.system.properties" />
            <sysproperty key="com.mysql.jdbc.testsuite.url" value="${com.mysql.jdbc.testsuite.url.final}" />
            <sysproperty key="jcov.template" value="${com.mysql.jdbc.coverage.result.dir.final}/template.xml"/>
            <sysproperty key="jcov.file" value="${com.mysql.jdbc.coverage.result.dir.final}/${com.mysql.jdbc.coverage.result.name.final}"/>

            <classpath>
                <pathelement location="${com.mysql.jdbc.extra.libs}/jcov/jcov_file_saver.jar" />
                <fileset dir="${com.mysql.jdbc.extra.libs}">
                    <include name="**/*.jar" />
                </fileset>
                <fileset dir="${buildDir}/${fullProdName}/lib">
                    <include name="**/*.jar" />
                </fileset>
                <pathelement location="${buildDir}/${fullProdName}-instr" />
                <pathelement location="${buildDir}/${fullProdName}" />
                <pathelement path="${java.class.path}" />
            </classpath>

            <formatter type="xml" />

            <batchtest unless="test" todir="${junit.unitregress.results}">
                <fileset dir="${buildDir}/${fullProdName}">
                    <include name="**/jdbc42/*Test.java" />
                </fileset>
            </batchtest>
        </junit>

        <junitreport todir="${junit.unitregress.results}/report">
            <fileset dir="${junit.unitregress.results}">
                <include name="**/TEST-*.xml" />
            </fileset>
            <report format="frames" todir="${junit.unitregress.results}/report" />
        </junitreport>

        <!-- Don't fail the build if we're doing multi-tests. -->
        <fail message="Tests failed. Check logs and/or reports in '${junit.results}'.">
            <condition>
                <and>
                    <equals arg1="${test.result.prefix}" arg2="" />
                    <isset property="tests.failed" />
                </and>
            </condition>
        </fail>

        <local name="test.message.dontfail" />
        <condition property="test.message.dontfail" value="Skipping test failures check because of multi-test..." else="">
            <not>
                <equals arg1="${test.result.prefix}" arg2="" />
            </not>
        </condition>
        <echo>${test.message.dontfail}</echo>
    </target>


    <!-- Run compliance test suite against multiple JVMs and server configs. 
         The JDBC compliance test suite is not shipped with MySQL Connector/J as it is not licensable except from Oracle.
         The properties com.mysql.jdbc.compliance.url.[1..8] and jdbc.compliance.location must be set prior to running this test. -->
    <target name="test-compliance-multijvm" description="Runs compliance test suite against multiple JVMs and server configs." depends="compile">
        <array8 arrayproperty="com.mysql.jdbc.testsuite.jvm" outputproperty="jvm.value" indexproperty="jvm.index">
            <array8 arrayproperty="com.mysql.jdbc.compliance.url" outputproperty="url.value" indexproperty="url.index">
                <local name="test.run" />
                <condition property="test.run">
                    <and>
                        <isset property="jvm.value" />
                        <isset property="url.value" />
                    </and>
                </condition>
                <antcall target="-test-multijvm-iteration">
                    <param name="jvm.value" value="${jvm.value}" />
                    <param name="url.value" value="${url.value}" />
                    <param name="url.index" value="${url.index}" />
                    <param name="test.mode" value="compliance" />
                    <param name="test.target" value="test-compliance" />
                    <param name="test.run" value="${test.run}" />
                </antcall>
            </array8>
        </array8>
    </target>


    <!-- Run compliance test suite against one JVMs and one server config. 
         The JDBC compliance test suite is not shipped with MySQL Connector/J as it is not licensible except from Oracle.
         The properties com.mysql.jdbc.compliance.url and jdbc.compliance.location must be set prior to running this test. -->
    <target name="test-compliance"
            description="Runs compliance test suite against one JVMs and one server config."
            depends="-compliance-url-check, -testsuite-jvm-check, compile, -set-test-result-prefix">
        <property name="junit.compliance.results" value="${junit.results}/${test.result.prefix}/compliance" />

        <mkdir dir="${junit.compliance.results}/report" />

        <echo>Running compliance test suite against '${com.mysql.jdbc.compliance.url.final}' with jvm '${com.mysql.jdbc3.testsuite.jvm.java}'</echo>

        <junit printsummary="yes"
               fork="on"
               forkmode="once"
               jvm="${com.mysql.jdbc3.testsuite.jvm.java}"
               errorProperty="tests.compliance.failed"
               failureProperty="tests.compliance.failed">
            <jvmarg value="-Xmx1024m" />

            <syspropertyset refid="junit.system.properties" />
            <sysproperty key="com.mysql.jdbc.compliance.url" value="${com.mysql.jdbc.compliance.url.final}" />

            <classpath>
                <fileset dir="${com.mysql.jdbc.extra.libs}">
                    <include name="**/*.jar" />
                </fileset>
                <fileset dir="${buildDir}/${fullProdName}/lib">
                    <include name="**/*.jar" />
                </fileset>
                <pathelement location="${buildDir}/${fullProdName}" />
                <pathelement path="${java.class.path}" />
                <pathelement location="${jdbc.compliance.location}" />
            </classpath>

            <formatter type="xml" />

            <test todir="${junit.compliance.results}" name="com.mysql.jdbc.compliance.tests.BatchUpdateTest" />
            <test todir="${junit.compliance.results}" name="com.mysql.jdbc.compliance.tests.ConnectionTest" />
            <test todir="${junit.compliance.results}" name="com.mysql.jdbc.compliance.tests.DatabaseMetaDataTest" />
            <test todir="${junit.compliance.results}" name="com.mysql.jdbc.compliance.tests.EscapeSyntaxTest" />
            <test todir="${junit.compliance.results}" name="com.mysql.jdbc.compliance.tests.PreparedStatementTest" />
            <test todir="${junit.compliance.results}" name="com.mysql.jdbc.compliance.tests.ResultSetMetadataTest" />
            <test todir="${junit.compliance.results}" name="com.mysql.jdbc.compliance.tests.ResultSetTest" />
            <test todir="${junit.compliance.results}" name="com.mysql.jdbc.compliance.tests.StatementTest" />
        </junit>

        <junitreport todir="${junit.compliance.results}/report">
            <fileset dir="${junit.compliance.results}">
                <include name="**/TEST-*.xml" />
            </fileset>
            <report format="frames" todir="${junit.compliance.results}/report" />
        </junitreport>

        <!-- Don't fail the build if we're doing multi-tests. -->
        <fail message="Tests failed. Check logs and/or reports in '${junit.compliance.results}'.">
            <condition>
                <and>
                    <equals arg1="${test.result.prefix}" arg2="" />
                    <isset property="tests.compliance.failed" />
                </and>
            </condition>
        </fail>

        <local name="test.message.dontfail" />
        <condition property="test.message.dontfail" value="Skipping test failures check because of multi-test..." else="">
            <not>
                <equals arg1="${test.result.prefix}" arg2="" />
            </not>
        </condition>
        <echo>${test.message.dontfail}</echo>
    </target>


    <!-- Run a generic multijvm iteration. -->
    <target name="-test-multijvm-iteration" if="${test.run}">
        <make-output-hier jvm="${jvm.value}" jdbcUrl="${url.value}" jdbcUrlIter="${url.index}" junitOutput="${junit.results}" />

        <local name="junit.output" />
        <loadfile srcfile="${junit.results}/hier" property="junit.output" />

        <antcall target="${test.target}">
            <param name="com.mysql.jdbc.testsuite.jvm.internal" value="${jvm.value}" />
            <param name="com.mysql.jdbc.${test.mode}.url.internal" value="${url.value}" />
            <param name="com.mysql.jdbc.noCleanBetweenCompiles" value="yes" />
            <param name="test.result.prefix" value="/${junit.output}" />
        </antcall>
    </target>


    <!-- Set the path where the test results will be stored -->
    <target name="-set-test-result-prefix" unless="${test.result.prefix}">
        <property name="test.result.prefix" value="" />
    </target>


    <!-- ********************************* -->
    <!-- ***** TESTING CODE COVERAGE ***** -->
    <!-- ********************************* -->


    <target name="test-coverage" depends="-jcov-instrument, test" description="Runs tests collecting coverage results."/>


    <target name="-jcov-instrument" depends="compile-driver, -set-test-coverage-detaults">
        <mkdir dir="${buildDir}/${fullProdName}-instr"/>
        <mkdir dir="${com.mysql.jdbc.coverage.result.dir.final}"/>
        <delete file="${com.mysql.jdbc.coverage.result.dir.final}/template.xml"/>

        <java fork="true" jvm="${com.mysql.jdbc.jdk8}/bin/java" classname="com.sun.tdk.jcov.Instr" classpathref="project.build.classpath">
            <arg line="-e testsuite.* -e demo.* -t ${com.mysql.jdbc.coverage.result.dir.final}/template.xml -output ${buildDir}/${fullProdName}-instr ${buildDir}/${fullProdName}" />
        </java>
    </target>


    <target name="-set-test-coverage-detaults">
        <condition property="com.mysql.jdbc.coverage.result.dir.final" value="${com.mysql.jdbc.coverage.result.dir}" else="${buildDir}/coverage">
            <isset property="com.mysql.jdbc.coverage.result.dir" />
        </condition>
        <condition property="com.mysql.jdbc.coverage.result.name.final" value="${com.mysql.jdbc.coverage.result.name}" else="result.xml">
            <isset property="com.mysql.jdbc.coverage.result.name" />
        </condition>
    </target>


    <!-- *********************************** -->
    <!-- ***** REPORTING CODE COVERAGE ***** -->
    <!-- *********************************** -->


    <target name="report-coverage" depends="-jcov-merge, -set-report-coverage-detaults" description="Merges coverage results and creates HTML coverage report.">
        <mkdir dir="${com.mysql.jdbc.coverage.report.dir.final}"/>
        <java fork="true" jvm="${com.mysql.jdbc.jdk8}/bin/java" classname="com.sun.tdk.jcov.RepGen" classpathref="project.build.classpath">
            <arg line="-e testsuite.* -e demo.* -src ${sourceDir} -o ${com.mysql.jdbc.coverage.report.dir.final} ${com.mysql.jdbc.coverage.merge.result.final}" />
        </java>
    </target>


    <target name="-jcov-merge" depends="-set-report-coverage-detaults" if="com.mysql.jdbc.coverage.merge.files">
        <java fork="true" jvm="${com.mysql.jdbc.jdk8}/bin/java" classname="com.sun.tdk.jcov.Merger" classpathref="project.build.classpath">
            <arg line="-o ${com.mysql.jdbc.coverage.merge.result.final} ${com.mysql.jdbc.coverage.merge.files}" />
        </java>
    </target>


    <target name="-set-report-coverage-detaults" depends="-set-test-coverage-detaults">
        <condition property="com.mysql.jdbc.coverage.merge.result.final" value="${com.mysql.jdbc.coverage.merge.result}" else="${com.mysql.jdbc.coverage.result.dir.final}/result.xml">
            <isset property="com.mysql.jdbc.coverage.merge.result" />
        </condition>
        <condition property="com.mysql.jdbc.coverage.report.dir.final" value="${com.mysql.jdbc.coverage.report.dir}" else="${com.mysql.jdbc.coverage.result.dir.final}/report">
            <isset property="com.mysql.jdbc.coverage.report.dir" />
        </condition>
    </target>


    <!-- ***************************** -->
    <!-- ***** MACRO DEFINITIONS ***** -->
    <!-- ***************************** -->


    <!-- Executes actions for each element of array properties (properties ending with '.N') of length 8. -->
    <macrodef name="array8">
        <attribute name="arrayproperty" />
        <attribute name="outputproperty" />
        <attribute name="indexproperty" />
        <element name="job" implicit="true" />
        <sequential>
            <array-job arrayproperty="@{arrayproperty}" outputproperty="@{outputproperty}" indexproperty="@{indexproperty}" indexvalue="1">
                <job />
            </array-job>
            <array-job arrayproperty="@{arrayproperty}" outputproperty="@{outputproperty}" indexproperty="@{indexproperty}" indexvalue="2">
                <job />
            </array-job>
            <array-job arrayproperty="@{arrayproperty}" outputproperty="@{outputproperty}" indexproperty="@{indexproperty}" indexvalue="3">
                <job />
            </array-job>
            <array-job arrayproperty="@{arrayproperty}" outputproperty="@{outputproperty}" indexproperty="@{indexproperty}" indexvalue="4">
                <job />
            </array-job>
            <array-job arrayproperty="@{arrayproperty}" outputproperty="@{outputproperty}" indexproperty="@{indexproperty}" indexvalue="5">
                <job />
            </array-job>
            <array-job arrayproperty="@{arrayproperty}" outputproperty="@{outputproperty}" indexproperty="@{indexproperty}" indexvalue="6">
                <job />
            </array-job>
            <array-job arrayproperty="@{arrayproperty}" outputproperty="@{outputproperty}" indexproperty="@{indexproperty}" indexvalue="7">
                <job />
            </array-job>
            <array-job arrayproperty="@{arrayproperty}" outputproperty="@{outputproperty}" indexproperty="@{indexproperty}" indexvalue="8">
                <job />
            </array-job>
        </sequential>
    </macrodef>


    <!-- Executes actions for array type macros, defined as elements nested in top level array macro calls. -->
    <macrodef name="array-job">
        <attribute name="arrayproperty" />
        <attribute name="outputproperty" />
        <attribute name="indexproperty" />
        <attribute name="indexvalue" />
        <element name="job" implicit="true" />
        <sequential>
            <local name="@{outputproperty}" />
            <condition property="@{outputproperty}" value="${@{arrayproperty}.@{indexvalue}}">
                <isset property="@{arrayproperty}.@{indexvalue}" />
            </condition>
            <local name="@{indexproperty}" />
            <condition property="@{indexproperty}" value="@{indexvalue}" else="0">
                <isset property="@{arrayproperty}.@{indexvalue}" />
            </condition>
            <job />
        </sequential>
    </macrodef>


    <!-- Makes an output directory hierarchy based on MySQL server version, OS information and JVM version. -->
    <macrodef name="make-output-hier">
        <attribute name="jvm" />
        <attribute name="jdbcUrl" />
        <attribute name="jdbcUrlIter" />
        <attribute name="junitOutput" />

        <sequential>
            <local name="jvm.java" />
            <property name="jvm.java" value="@{jvm}/bin/java" />

            <local name="jvm.version" />
            <exec executable="${jvm.java}" outputproperty="jvm.version" failonerror="false" failifexecutionfails="false" resultproperty="jvmcheckexitstatus">
                <arg value="-version" />
            </exec>

            <fail message="The provided JVM reference is invalid '@{jvm}'. Set the path to a valid JVM(s) (JRE or JDK) home in the properties 'com.mysql.jdbc.testsuite.jvm.[1..8]'.">
                <condition>
                    <not>
                        <and>
                            <equals arg1="${jvmcheckexitstatus}" arg2="0" />
                            <matches string="${jvm.version}" pattern="^java version &quot;\d+\.\d+\.\d+_\d+&quot;.*$" casesensitive="true" multiline="true" />
                        </and>
                    </not>
                </condition>
            </fail>

            <java fork="true" jvm="${jvm.java}" classname="com.mysql.jdbc.util.VersionFSHierarchyMaker">
                <jvmarg value="-Xmx1024m" />

                <sysproperty key="com.mysql.jdbc.testsuite.url" value="@{jdbcUrl}" />

                <classpath>
                    <fileset dir="${com.mysql.jdbc.extra.libs}">
                        <include name="**/*.jar" />
                    </fileset>
                    <fileset dir="${buildDir}/${fullProdName}/lib">
                        <include name="**/*.jar" />
                    </fileset>
                    <pathelement location="${buildDir}/${fullProdName}" />
                    <pathelement path="${java.class.path}" />
                </classpath>

                <arg line="@{junitOutput} @{junitOutput}/hier @{jdbcUrlIter}" />
            </java>
        </sequential>
    </macrodef>


    <!-- ********************************* -->
    <!-- ***** FABRIC TESTS AND DEMO ***** -->
    <!-- ********************************* -->


    <!-- 'test' and 'demo' targets for Fabric intentionally don't depend on 'build'.
         This allows building and testing code with the environmental JVM. -->

    <!-- Test Fabric setup. -->
    <target name="test-fabric-setup" description="Tests Fabric setup." depends="-extra-libs-check">
        <java fork="on" classname="testsuite.fabric.SetupFabricTestsuite" dir="${buildDir}/${fullProdName}">
            <sysproperty key="com.mysql.fabric.testsuite.username" value="${com.mysql.fabric.testsuite.username}" />
            <sysproperty key="com.mysql.fabric.testsuite.password" value="${com.mysql.fabric.testsuite.password}" />
            <sysproperty key="com.mysql.fabric.testsuite.global.host" value="${com.mysql.fabric.testsuite.global.host}" />
            <sysproperty key="com.mysql.fabric.testsuite.global.port" value="${com.mysql.fabric.testsuite.global.port}" />
        </java>
    </target>


    <!-- Run test suite for Fabric. -->
    <target name="test-fabric" description="Runs the test suite for Fabric." depends="test-fabric-setup">
        <junit printsummary="yes" fork="on" forkmode="once">
            <sysproperty key="com.mysql.fabric.testsuite.hostname" value="${com.mysql.fabric.testsuite.hostname}" />
            <sysproperty key="com.mysql.fabric.testsuite.port" value="${com.mysql.fabric.testsuite.port}" />
            <sysproperty key="com.mysql.fabric.testsuite.fabricUsername" value="${com.mysql.fabric.testsuite.fabricUsername}" />
            <sysproperty key="com.mysql.fabric.testsuite.fabricPassword" value="${com.mysql.fabric.testsuite.fabricPassword}" />
            <sysproperty key="com.mysql.fabric.testsuite.username" value="${com.mysql.fabric.testsuite.username}" />
            <sysproperty key="com.mysql.fabric.testsuite.password" value="${com.mysql.fabric.testsuite.password}" />
            <sysproperty key="com.mysql.fabric.testsuite.database" value="${com.mysql.fabric.testsuite.database}" />
            <sysproperty key="com.mysql.fabric.testsuite.global.host" value="${com.mysql.fabric.testsuite.global.host}" />
            <sysproperty key="com.mysql.fabric.testsuite.global.port" value="${com.mysql.fabric.testsuite.global.port}" />
            <sysproperty key="com.mysql.fabric.testsuite.shard1.host" value="${com.mysql.fabric.testsuite.shard1.host}" />
            <sysproperty key="com.mysql.fabric.testsuite.shard1.port" value="${com.mysql.fabric.testsuite.shard1.port}" />
            <sysproperty key="com.mysql.fabric.testsuite.shard2.host" value="${com.mysql.fabric.testsuite.shard2.host}" />
            <sysproperty key="com.mysql.fabric.testsuite.shard2.port" value="${com.mysql.fabric.testsuite.shard2.port}" />

            <classpath>
                <fileset dir="${com.mysql.jdbc.extra.libs}">
                    <include name="**/*.jar" />
                </fileset>
                <fileset dir="${buildDir}/${fullProdName}/lib">
                    <include name="**/*.jar" />
                </fileset>
                <pathelement location="${buildDir}/${fullProdName}" />
                <pathelement path="${java.class.path}" />
            </classpath>

            <formatter type="brief" />

            <test if="test" name="${test}" />

            <batchtest unless="test">
                <fileset dir="${buildDir}/${fullProdName}">
                    <include name="**/fabric/**/Test*.java" />
                    <exclude name="**/fabric/**/TestHashSharding.java" />
                    <exclude name="**/fabric/**/TestHABasics.java" />
                </fileset>
            </batchtest>
        </junit>
    </target>


    <!-- Launch a Fabric demo. -->
    <target name="demo-fabric" description="Launches a Fabric demo." depends="demo-fabric-client1, demo-fabric-employees-jdbc" />


    <!-- Launch a client component from the Fabric demo. -->
    <target name="demo-fabric-client1" description="Launches a client component from the Fabric demo." depends="-extra-libs-check">
        <java fork="on" classname="demo.fabric.Client1_Fabric" dir="${buildDir}/${fullProdName}">
            <sysproperty key="com.mysql.fabric.testsuite.hostname" value="${com.mysql.fabric.testsuite.hostname}" />
            <sysproperty key="com.mysql.fabric.testsuite.port" value="${com.mysql.fabric.testsuite.port}" />
            <sysproperty key="com.mysql.fabric.testsuite.fabricUsername" value="${com.mysql.fabric.testsuite.fabricUsername}" />
            <sysproperty key="com.mysql.fabric.testsuite.fabricPassword" value="${com.mysql.fabric.testsuite.fabricPassword}" />
            <sysproperty key="com.mysql.fabric.testsuite.username" value="${com.mysql.fabric.testsuite.username}" />
            <sysproperty key="com.mysql.fabric.testsuite.password" value="${com.mysql.fabric.testsuite.password}" />
            <sysproperty key="com.mysql.fabric.testsuite.database" value="${com.mysql.fabric.testsuite.database}" />
            <sysproperty key="com.mysql.fabric.testsuite.global.host" value="${com.mysql.fabric.testsuite.global.host}" />
            <sysproperty key="com.mysql.fabric.testsuite.global.port" value="${com.mysql.fabric.testsuite.global.port}" />
            <sysproperty key="com.mysql.fabric.testsuite.shard1.host" value="${com.mysql.fabric.testsuite.shard1.host}" />
            <sysproperty key="com.mysql.fabric.testsuite.shard1.port" value="${com.mysql.fabric.testsuite.shard1.port}" />
            <sysproperty key="com.mysql.fabric.testsuite.shard2.host" value="${com.mysql.fabric.testsuite.shard2.host}" />
            <sysproperty key="com.mysql.fabric.testsuite.shard2.port" value="${com.mysql.fabric.testsuite.shard2.port}" />
        </java>
    </target>


    <!-- Launch an employees component from the Fabric demo. -->
    <target name="demo-fabric-employees-jdbc" description="Launches a employees component from the Fabric demo." depends="-extra-libs-check">
        <java fork="on" classname="demo.fabric.EmployeesJdbc" dir="${buildDir}/${fullProdName}">
            <sysproperty key="com.mysql.fabric.testsuite.hostname" value="${com.mysql.fabric.testsuite.hostname}" />
            <sysproperty key="com.mysql.fabric.testsuite.port" value="${com.mysql.fabric.testsuite.port}" />
            <sysproperty key="com.mysql.fabric.testsuite.fabricUsername" value="${com.mysql.fabric.testsuite.fabricUsername}" />
            <sysproperty key="com.mysql.fabric.testsuite.fabricPassword" value="${com.mysql.fabric.testsuite.fabricPassword}" />
            <sysproperty key="com.mysql.fabric.testsuite.username" value="${com.mysql.fabric.testsuite.username}" />
            <sysproperty key="com.mysql.fabric.testsuite.password" value="${com.mysql.fabric.testsuite.password}" />
            <sysproperty key="com.mysql.fabric.testsuite.database" value="${com.mysql.fabric.testsuite.database}" />
            <sysproperty key="com.mysql.fabric.testsuite.global.host" value="${com.mysql.fabric.testsuite.global.host}" />
            <sysproperty key="com.mysql.fabric.testsuite.global.port" value="${com.mysql.fabric.testsuite.global.port}" />
            <sysproperty key="com.mysql.fabric.testsuite.shard1.host" value="${com.mysql.fabric.testsuite.shard1.host}" />
            <sysproperty key="com.mysql.fabric.testsuite.shard1.port" value="${com.mysql.fabric.testsuite.shard1.port}" />
            <sysproperty key="com.mysql.fabric.testsuite.shard2.host" value="${com.mysql.fabric.testsuite.shard2.host}" />
            <sysproperty key="com.mysql.fabric.testsuite.shard2.port" value="${com.mysql.fabric.testsuite.shard2.port}" />
        </java>
    </target>


    <!-- Launch a Hibernate component from the Fabric demo. -->
    <target name="demo-fabric-hibernate" description="Launches a Hibernate component from the Fabric demo." depends="-extra-libs-check">
        <java fork="on" classname="demo.fabric.HibernateFabric" dir="${buildDir}/${fullProdName}">
            <sysproperty key="com.mysql.fabric.testsuite.hostname" value="${com.mysql.fabric.testsuite.hostname}" />
            <sysproperty key="com.mysql.fabric.testsuite.port" value="${com.mysql.fabric.testsuite.port}" />
            <sysproperty key="com.mysql.fabric.testsuite.fabricUsername" value="${com.mysql.fabric.testsuite.fabricUsername}" />
            <sysproperty key="com.mysql.fabric.testsuite.fabricPassword" value="${com.mysql.fabric.testsuite.fabricPassword}" />
            <sysproperty key="com.mysql.fabric.testsuite.username" value="${com.mysql.fabric.testsuite.username}" />
            <sysproperty key="com.mysql.fabric.testsuite.password" value="${com.mysql.fabric.testsuite.password}" />
            <sysproperty key="com.mysql.fabric.testsuite.database" value="${com.mysql.fabric.testsuite.database}" />
            <sysproperty key="com.mysql.fabric.testsuite.global.host" value="${com.mysql.fabric.testsuite.global.host}" />
            <sysproperty key="com.mysql.fabric.testsuite.global.port" value="${com.mysql.fabric.testsuite.global.port}" />
            <sysproperty key="com.mysql.fabric.testsuite.shard1.host" value="${com.mysql.fabric.testsuite.shard1.host}" />
            <sysproperty key="com.mysql.fabric.testsuite.shard1.port" value="${com.mysql.fabric.testsuite.shard1.port}" />
            <sysproperty key="com.mysql.fabric.testsuite.shard2.host" value="${com.mysql.fabric.testsuite.shard2.host}" />
            <sysproperty key="com.mysql.fabric.testsuite.shard2.port" value="${com.mysql.fabric.testsuite.shard2.port}" />

            <classpath>
                <fileset dir="${com.mysql.jdbc.extra.libs}">
                    <include name="**/*.jar" />
                </fileset>
                <fileset dir="src/lib">
                    <include name="**/*.jar" />
                </fileset>
                <dirset dir="${buildDir}/${fullProdName}" />
            </classpath>
        </java>
    </target>
</project>
